SA2-30 to SA2-30 Power Cord – WhatsMiner Hydro
$32.99
Skip to product information
SA2-30 to SA2-30 Power Cord – WhatsMiner Hydro
$32.99
Double-Ended SA2-30 Power Cord for WhatsMiner Hydro
This SA2-30 to SA2-30 cord (380 V three-phase, 4 x 2.5 mm², 53 cm) connects the power supply of a WhatsMiner Hydro miner to the PDU in the hydro cabinet.
The Right Connection for Your Setup
Replacing a worn cord or planning a clean connection in advance helps you avoid last-minute workarounds.
Compatibility and Limitations
The PDU outlet must be an SA2-30 socket that matches the cord’s plug. Check the full model numbers of the miner and the PDU. Not compatible with Antminer Hydro models (LP20).
Before You Order
Check the length, conductor size, current rating, voltage, and plugs. Have a qualified electrician inspect the circuit and its protective devices.
To make sure you get the right part, send OMS your machine’s exact model and a photo of the part you need to replace.
Recommended PDU
If you buy this double-ended SA2-30 cord, we recommend using it with a PDU for WhatsMiner and Antminer hydro miners.
Plan Your Setup
ASIC Power Cords · Check Your Part with OMS · Support & Repairs