LP20 to SA2-30 Power Cord – Antminer Hydro

ANTWIRE LP20 Power Cord for Antminer Hydro (SA2-30 or P33)

This ANTWIRE LP-20 JI25A cord (1.5 m, 4 x 2.5 mm²) connects the APW11 power supply of an Antminer Hydro to a hydro PDU through an SA2-30 or P33 plug.

The Right Connection for Your Setup

Replacing a worn cord or planning a clean connection in advance helps you avoid last-minute workarounds.

Compatibility and Limitations

“Hydro” is not a single plug standard. Confirm the LP20 connector, pinout, power supply, and exact miner model, and do not use this cord in place of an LP34. The SA2-30 version connects to a hydro PDU with SA2-30 outlets; the P33 version connects to a P33 PDU.

Before You Order

Check the length, conductor size, current rating, voltage, and plugs. Have a qualified electrician inspect the circuit and its protective devices.

To make sure you get the right part, send OMS your machine’s exact model and a photo of the part you need to replace.

Recommended PDU

If you buy the ANTWIRE LP20 to SA2-30 cord, we recommend using it with a PDU for WhatsMiner and Antminer hydro miners.

Plan Your Setup

ASIC Power Cords · Check Your Part with OMS · Support & Repairs